Model Code Check
We check equipment model numbers and chassis serials against manufacturer microfiche to establish factory caliper casting numbers.
Target: Casting verification
Friction Components • Austin Depot
Brake Pad Sets Matched to Caliper Castings
Severe-duty friction kits for commercial carriers, skid steers, and site haulers. We verify carrier bracket spacing, thickness tapers, and rotor alloy before issuing a quote.
Severe-Duty Friction Specifications
Brake pad compounds are matched to rotor alloy and gross axle rating. Generic aftermarket blocks glaze under sustained downhill retarding or heavy industrial loads.
SKU: BRK-AXLE-HD69
OEM & Aftermarket Matched
Every severe-duty brake pad set supplied through our Austin facility utilizes high-copper or low-metallic friction matrices bonded to steel backing plates under 45-ton pressure. We do not distribute generic organic pads for industrial machinery. Heavy equipment requires stable friction coefficients up to 650°C without heat fade or backing separation.
A common failure mode in Texas field operations is backing plate deflection caused by uneven caliper slide pins. When the steel plate bends even 0.8 mm, the friction material cracks along the centre slot, creating immediate pedal sponge and uneven wear. We inspect backing plate thickness against OEM specifications before boxing.
Compound
Semi-Metallic
Max Temp
650°C (1202°F)
Plate Gauge
5.5 mm Steel
Noise Damping
Multi-layer Shim
| Axle Rating / Series | Friction Code | Pad Thickness | Price Basis |
|---|---|---|---|
| Compact Utility & Light Hauler | FF Rated Semi-Met | 14.8 mm with plate | 69.99 USD per set |
| Commercial Carrier Medium Axle | GG Heavy Duty | 17.2 mm with plate | 73.50 USD per set |
| Industrial Skid & Heavy Axle Kit | GG Severe Thermal | 19.5 mm with plate | 76.99 USD per set |
Three Verification Gates Before Release
No checkout button until the part number matches your housing. We prevent freight returns by confirming physical measurements before any box leaves our Austin depot.
Pad Profile Overlay
Friction backing geometry, ear tabs, clip slots, and wear sensor cutouts are matched against 1:1 blueprint outlines.
Target: 0.1 mm tolerance
Caliper Bracket Photo
Clients send a cell photo of the worn pad next to a steel scale or tape measure. We verify bevel angle and spring clips.
Target: Photo confirmation
Austin Inspection Desk Record
Active VerificationIvan Petrov conducts intake checks on all incoming friction batches. Sets displaying chipped edge friction material, missing anti-rattle shims, or unchamfered edges are quarantined immediately.
Plate Flatness
< 0.08 mm
Shear Strength
> 3.8 MPa
Coverage
100% Backing
Pricing Variables and Fulfillment
Quotes depend strictly on 6 verified variables. We give firm figures before dispatch and never alter prices after confirmation.
Variable 1
Equipment Model
Machine series, axle manufacturer, and caliper configuration.
Variable 2
Part Number
OEM cross-reference SKU or certified aftermarket interchange.
Variable 3
Component Photo
Clear photograph of the removed pad and caliper cradle.
Variable 4
Quantity Needed
Axle sets (each set covers one complete axle with 4 pads).
Variable 5
Warehouse Shelf Status
Immediate Austin shelf stock versus priority distributor transfer.
Variable 6
Delivery Route
Barton Springs Road counter pickup or Texas commercial freight.
Texas Registered Business • 90-Day Parts Warranty
Every brake pad set sold by Bavrento carries a binding 90-day parts replacement warranty. If a friction block shows premature debonding, cracking, or casting mismatch under normal operating specifications, we exchange the set or issue warehouse credit immediately.
Application Boundaries and Exclusions
Knowing what we refuse to supply protects your equipment. We decline applications where safety margins cannot be confirmed.
-
Who this is for: Commercial workshops, fleet mechanics, farm maintenance teams, and equipment operators who have physical access to the machinery and can verify caliper dimensions.
-
Who this is not for: Buyers demanding an unverified instant checkout button without providing a model code or photograph. We will not ship friction kits on guesswork.
-
Refused applications: Custom altered calipers, passenger racing vehicles, or applications where rotors have been machined thinner than minimum discard thickness.
Explore related component sectors: review our charging alternators, inspect high-pressure fuel delivery pumps, or check general replacement parts catalogue for suspension pins and pivot bushings.
Direct Parts Inquiry Desk
Submit your machinery model and caliper details. Ivan Petrov reviews every request and replies with confirmed availability and exact price within the same business day.